Entry-level NETWORK engr - CCNA

[aramat_2nd]

R3 Configuration:

R3#sh run
Building configuration...

!
Version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R3
enable secret 5 $sdf$6978yhg$jnb76sd
!
!
!
ip subnet-zero
!
!
!
!
!
!
!
!
!
interface Serial0
ip address 10.1.1.1 255.255.255.252
no ip directed-broadcast
!
interface Serial1
ip address 172.16.40.2 255.255.255.252
no ip directed-broadcast
clock rate 64000
!
interface FastEthernet0/0
ip address 172.16.50.1 255.255.255.0
no ip directed-broadcast
!
!
!
ip classless
no ip http server
!
ip route 172.16.10.0 255.255.255.0 SERIAL1
ip route 172.16.20.0 255.255.255.0 SERIAL1
ip route 172.16.30.0 255.255.255.0 SERIAL1
ip route 192.168.10.0 255.255.255.0 SERIAL0
ip route 192.168.20.0 255.255.255.0 SERIAL0
ip route 192.168.30.0 255.255.255.0 SERIAL0
ip route 192.168.40.0 255.255.255.0 SERIAL0
ip route 192.168.50.0 255.255.255.0 SERIAL0
!
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end

R3#

[aramat_2nd]

R4 Configuration:

R4#sh run
Building configuration...

!
Version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R4
enable secret 5 $sdf$6978yhg$jnb76sd
!
!
!
ip subnet-zero
!
!
!
!
!
!
!
!
!
interface Serial0
ip address 10.1.1.2 255.255.255.252
no ip directed-broadcast
clock rate 64000
!
interface Serial1
ip address 192.168.20.1 255.255.255.252
no ip directed-broadcast
!
interface FastEthernet0/0
ip address 192.168.10.1 255.255.255.0
no ip directed-broadcast
!
router rip
redistribute static
network 10.0.0.0
network 192.168.20.0
network 192.168.10.0
!
!
!
ip classless
no ip http server
!
ip route 172.16.10.0 255.255.255.0 10.1.1.2
ip route 172.16.20.0 255.255.255.0 10.1.1.2
ip route 172.16.30.0 255.255.255.0 10.1.1.2
ip route 172.16.40.0 255.255.255.0 10.1.1.2
ip route 172.16.50.0 255.255.255.0 10.1.1.2
ip route 10.1.1.0 255.255.255.0 10.1.1.2
!
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end

R4#

[aramat_2nd]

R5 Configuration

R5#sh run
Building configuration...

!
Version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R5
!
!
!
ip subnet-zero
!
!
!
!
!
!
!
!
!
interface Serial0
ip address 192.168.40.1 255.255.255.252
no ip directed-broadcast
!
interface Serial1
ip address 192.168.20.2 255.255.255.252
no ip directed-broadcast
clock rate 64000
!
interface FastEthernet0/0
ip address 192.168.30.1 255.255.255.0
no ip directed-broadcast
!
router rip
network 192.168.20.0
network 192.168.30.0
network 192.168.40.0
!
!
!
ip classless
no ip http server
!
!
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end

R5#

[aramat_2nd]

R6 Configuration:

R6#sh run
Building configuration...

!
Version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R6
enable secret 5 $sdf$6978yhg$jnb76sd
!
!
!
ip subnet-zero
!
!
!
!
!
!
!
!
!
interface Serial0
ip address 192.168.40.2 255.255.255.252
no ip directed-broadcast
clock rate 64000
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
interface FastEthernet0/0
ip address 192.168.50.1 255.255.255.0
no ip directed-broadcast
!
router rip
network 192.168.40.0
network 192.168.50.0
!
!
!
ip classless
no ip http server
!
!
!
!
!
line con 0
transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end

R6#

[aramat_2nd]

Sorry po mga moderators.

I'm still working on that diagram and please help me kung alam niyo. Tnx.

[aramat_2nd]

zerglings, Boson Network Simulator ang ginagamit ko ngayon. Nakakainis nga e kasi napaka-unrealiable nito. Minsan ayaw talaga mag-ping kahit naka-up na lahat ang status ng router interfaces. So yun.

Nag-download ako niyang sinabi mo. Paano mag-register nang IOS image?

Please help me. I really want to learn the subject. Actually self-study lang din ako. I don't have that much budget para mag-enroll pa sa mga schools like Mapua, UPITC etc. So I'm studying the course on my own. Mag-aaral ako ulit kapag sumusuweldo na ako.

I was hired for an entry level position -- IT, Systems and Network Engineer so I am really studying hard to impress my employer. Kahit alam nila na hilaw pa ako. Hahahaha

Help me. Thanks.

[aramat_2nd]

Kung meron kayong free training (as in free ha. walang bayad), baka puwede akong pumunta. I still have few days left..

[zerglings]

aramat, dito mo na lang i-post tanong mo sa Cisco stuff. medyo hindi ito appropriate sa thread na ito. anyways, sasagutin ko naman tanong mo. ang problem config mo eh, kulang ng isang route sa R3. kailangan mo ng static route papunta sa R4. kung baga, ito yung gateway of last resort. if you need explanation kung bakit then sabihin mo lang. again, don mo na lang sa kabilang thread i-tanong.

Ganito yung sinasabi ko syo:
ip route 0.0.0.0 0.0.0.0 <ip address or interface here>

Kung gusto mo rin, pwede mo rin gawin sa R2 at R1 para hindi mo na isa-isahin yung ip route statements nandon. ang haba ng configs eh. hindi ko na sinulat yung setup mo para i-map ko kung may finifilter ka or wala. so depende rin sa gusto mong gawin.

About sa training, nag conference kami kahapon. Mga nagaaral ng CCNA sila at sumagot kami ng mga tanong nila. Magkakaron ulit kami ng ganon. Pero hindi ko pa alam kung kailan. Baka next week na ulit. Completely free ito. Though, hindi ito training per se. I am gonna post it here yung schedule so just check it out paminsan minsan.

[aramat_2nd]

zerglings, i-post mo na yung explanation on the other thread. duon na rin ako mag-po-post ng ibang questions ko.

configuring a default route on a router yang command na yan?

[scream_benihime]

^ Yes. And your training will be an on-site inspection/support to your clients. Hindi yung magdi-discuss kayo sa classroom. Kunwari tumawag ang client niyo na may problema ang isang router nila sa isang branch office, if you can resolve the issue by connecting to that router via telnet, SSH, you will resolve that issue in your office. Kahit hindi ka na pumunta dun sa site na yun. Just check the router configuration etc. Pero kung kailangan niyo pumunta sa site na yun because you need to change something let's say physical connection, then isasama ka sa mga Senior Network Engineers nila para matutunan mo kung paano ang flow ng trabaho.

Minsan may mga issues na ikaw lang ang pupunta kahit bago ka dahil busy yung ibang engineers niyo. Walang available kundi ikaw lang. Alangan naman na hindi ka pumunta e urgent call yun? So be prepared din and work smartly. Act like you know how to resolve the issue (kahit hinde). Hehehe

Good luck.

tsk tsk tsk.. Nakakarelate ako! hahaha

[amajbbYUAP]

^ Hehehe. Pero ang gaan na lang ng trabaho kapag natuto ka na, di ba? Tiyagaan lang talaga sa simula.

[bluerayaj]

IP Engineer here..stuck in Telco Apps support..haist!
Want to go back where I truly belong..

[Stridum]

Here's my opinion sayo. While you're still looking for a job, start working on your CCNP or whatever concentration you want. CCNA guys are dime a dozen, so stopping at CCNA is not really a good move.

I disagree. In my opinion, it's better to have a CCNA job first before studying CCNP.

@topic, I am about to take my CCNA exam as well. I hope to pass and to get a good job. Good luck to all all of us here =)

[zerglings]

I disagree. In my opinion, it's better to have a CCNA job first before studying CCNP.

Aight. If that's what you think then go ahead. If you want to separate you from the rest then you gotta have CCNP. Like I said, there are bunch of CCNAs in the Phils, India, US, and etc. If I am a manager I'd rather pick CCNPs than CCNAs from a pile of resumes. That's just my opinion. You know what they say about that, "opinions are like @ssh0le, everybody has one".

@topic, I am about to take my CCNA exam as well. I hope to pass and to get a good job. Good luck to all all of us here =)

Good luck!

[amajbbYUAP]

Stridum mag-self study ka na for CCNP habang naghahanap ka ng trabaho. Maraming theories at complex networks ang kailangan mong matutunan dun. Apat (4) na exam (150 US Dollars each) ang kailangan mong kunin before mo makuha ang CCNP certificate. Para hindi sayang ang oras mo. Paano kung matagalan kang makahanap ng work?

Anyways, opinion ko lang naman yun. Ikaw pa rin ang mag-de-decide.

All the best.

[zerglings]

Stridum mag-self study ka na for CCNP habang naghahanap ka ng trabaho. Maraming theories at complex networks ang kailangan mong matutunan dun. Apat (4) na exam (150 US Dollars each) ang kailangan mong kunin before mo makuha ang CCNP certificate. Para hindi sayang ang oras mo. Paano kung matagalan kang makahanap ng work?

Anyways, opinion ko lang naman yun. Ikaw pa rin ang mag-de-decide.

All the best.

Exactly! That's what I usually say to all people that are having problems getting a job in the field. Lalo na yung mga bago lang sa field. Since wala ka pang experience at masyadong competitive na ang IT at lalo na ang mga companies they expect you to know a lot.

RE: CCNP
I posted something here about the changes to the exam.

You have until June 30, 2010 to pass all four of them if you want the old curriculum. Now, if you pass BSCI and BCMSN now then you it'll be counted as ROUTE and SWITCH exam then that means you only need the TSHOOT exam. This is all based on the PDF file that Cisco sent out to CNAP instructors.

I'm done with BCMSN and will continue CCNP next year. Right now, concentrating on DESGN exam.

[amajbbYUAP]

Kumusta na kayo mga Network Engineers?

[TheEndofDays]

Just an info

I meet a friend in Singapore, he said he is CCNA Wireless and currently going to CCNP Wireless. He said right now the industry is flooded with CCNA and CCNP, everybody passes to the eye of the needle. With the emergence of wireless technology you may now consider changing paths

[amajbbYUAP]

CCNA routing/switching ang foundation ng technologies na yan? Para sa akin, mas maganda kung may alam ka sa basic routing and switching.

[zerglings]

R&S pa rin, IMO. Wireless is an emerging technology for sure. However, most of the job postings that you'll see requires CCNP. Most, if not all, jobs that I've seen that requires wireless knowledge asks for CWNA/CWNE certification and not CCNP Wireless.