Kitchen

[neoanderson88123]

hindi akin yang kitchen (kay husband yan )

interesado ko dyan sa scrap ng san jose, laminated sya di ba? ano nilalagay mo sa edge? pasilip ng projects mo

may edge laminates sa sanjose. 7-8 pesos per meter. tapos nirarugby ko lang. pero mas maganda ang heat press. kaso wala ako nun. kaya ang mga pinipili ko lang ay karamihan ng surfaces at edges ay laminated na.. kapag nagputol ako, dun lang ako naglalagay ng edge laminate.

pero wala nang malalaking parts. kaya usually, kapag nandun na ako sa warehouse, revise ako nang revise ng design ko sa utak ko. usully my design is dictated by the available materials dun.

meron pa silang mga luma dun. particle board and plyboard ang gamit. iwas dito. piliin ang marine plywood.

[Japorms09]

Good day to all Pexers!

I am moving in to a 30 square meters condo (studio type). I have a dilemma on how to setup my kitchen. I love to cook ( and eat, of course ) and on my free time I would prefer to stay in my kitchen cooking something.

The kitchen part of the condo is quite small. Actually, really small. There is already a sink which I cannot move because of the piping. My initial plan is to place a gas range beside the sink, add a rangehood and a built in kitchen cabinet. The rest of the kitchen stuff (ref, microwave, etc) will be place on the other side - side of the CR. I know there isn't much I can do with the kitchen but I'm hoping for it to somehow become functional.

I'll appreciate suggestions/recommendations very much .

Here are some pictures of the place:

http://www.flickr.com/photos/35584130@N06/4157610016/

http://www.flickr.com/photos/3558413...n/photostream/

http://www.flickr.com/photos/3558413...n/photostream/


Also, baka meron kayo kilala na contractor na pwede gumawa room sa unit ko.


Thanks in advance!

what happen sa renovation mo? pashare naman ng contractor

[gotta lick it]

2 nga sana gusto ko sir para sa soap dispenser, pero wala kameng makita dating available sa mga napuntahan namen na home depot

thanks wala pang pandagdag ng backspplash, wala pang budget

nice kitchen ... it already has a backsplash (splashboard). it is the black wall tile or slab above the counter.

how much did it cost and what are the measurements?

[angeljolie]

^Hehe ganyan din yung saken, may maliit na splashboard. But I still don't consider it backsplash kasi hindi naman nya napo-protect yung wall talaga from the splashes.

[luv143]

nice kitchen ... it already has a backsplash (splashboard). it is the black wall tile or slab above the counter.



how much did it cost and what are the measurements?

pm sent

^Hehe ganyan din yung saken, may maliit na splashboard. But I still don't consider it backsplash kasi hindi naman nya napo-protect yung wall talaga from the splashes.

yap, yun din ibig ko sabihin, yung pandagdag para sa splashboard/backsplash gusto ko kase buo yun, may napagtanungan na ko dito, yung nag iinstall mismo ng mga windows dito sa village 280 per square foot daw ang tempered glass sa kanila

[gresh_anicoche]

Hi everyone , I'm a interior designer , one of my expertise is kitchen design...

Kindly check my adds:
http://www.sulit.com.ph/index.php/vi...Position,1-2,2

Www.wix.com/omabreiz/abi - our ABI portfolio

[asiastreak]

pm sent

yap, yun din ibig ko sabihin, yung pandagdag para sa splashboard/backsplash gusto ko kase buo yun, may napagtanungan na ko dito, yung nag iinstall mismo ng mga windows dito sa village 280 per square foot daw ang tempered glass sa kanila

you don't need to have your backsplash tempered, pero if you can afford it, why not. is it 3/8" thick? kasama na ba graphicote?

[angeljolie]

yap, yun din ibig ko sabihin, yung pandagdag para sa splashboard/backsplash gusto ko kase buo yun, may napagtanungan na ko dito, yung nag iinstall mismo ng mga windows dito sa village 280 per square foot daw ang tempered glass sa kanila

Uy ang mura naman. San yan? May graphicote na ba yun? Thanks!

[petitelady2012]

eto pa pala closets (wala ako hilig sa cabinets hehehe) si Manong Carpenter from Bacoor din po gumawa

http://i54.photobucket.com/albums/g8...9/nanaysrm.jpg

to raincloud06
can I have the contact number of manong carpenter?thanks

[Achemist]

2 nga sana gusto ko sir para sa soap dispenser, pero wala kameng makita dating available sa mga napuntahan namen na home depot



thanks. wala pang pandagdag ng backspplash, wala pang budget
http://a1.sphotos.ak.fbcdn.net/hphot...24191326_n.jpg

LUV143 , Very nice kitchen so elegant. How much does it cost. Thanks. Hope pwde din ganyan ang kitchen sa Charlotte Unit in BF.

[drumrules]

2 nga sana gusto ko sir para sa soap dispenser, pero wala kameng makita dating available sa mga napuntahan namen na home depot




http://a1.sphotos.ak.fbcdn.net/hphot...24191326_n.jpg

hello luv143!..ang ganda ng kitchen mo tanong ko *** baka pwede mong ma pm sakin *** gumawa ng kitchen mo?and kung magkakano aabutin ?para mapgipunan..hehehehe!.salamat

[luv143]

you don't need to have your backsplash tempered, pero if you can afford it, why not. is it 3/8" thick? kasama na ba graphicote?

yap, 3/8" thick pero hindi pa daw kasam ang graphicote...pero sabi nga ng mag install, hindi naman na nga *** kailangan tempered pam backsplash..

Uy ang mura naman. San yan? May graphicote na ba yun? Thanks!

dito sa cavite, hindi pa pala kasama ang graphicote, ang mahal PHP 700 daw pag kasama graphicote

LUV143 , Very nice kitchen so
elegant. How much does it cost. Thanks. Hope pwde din ganyan ang kitchen sa Charlotte Unit in BF.

pwedeng pwede yan sa charlotte, ganda nga ng orientation sa inyo, nakahiwalay talaga ang kitchen...pm sent

hello luv143!..ang ganda ng kitchen mo tanong ko *** baka pwede mong ma pm sakin *** gumawa ng kitchen mo?and kung magkakano aabutin ?para mapgipunan..hehehehe!.salamat

puno na daw inbox mo

[asiastreak]

yap, 3/8" thick pero hindi pa daw kasam ang graphicote...pero sabi nga ng mag install, hindi naman na nga *** kailangan tempered pam backsplash..

medyo mahal nga, normally, 230 lang ang addtl cost ng pa graphicote.
kung mag markup sila, siguro abot ng 270. pero parang naging +420. hehehe.

di mo rin need ng 3/8" thick. 1/4" is enough lalo na kung ipapatemper mo.
pag nilagyan ng double adhesive sa likod, parang 3/8" na rin kakainin niyang kapal.
ang nakikita ko lang problem mo:
#1 yung area ilalim ng range hood, mas mataas sa iba. unless di mo na palalagyan?
#2, yung 3 outlets mo, magkalapit yung 2, medyo risky butasan.

ganda siguro yellow o orange diyan. ano plan mong color?

[drumrules]

yap, 3/8" thick pero hindi pa daw kasam ang graphicote...pero sabi nga ng mag install, hindi naman na nga *** kailangan tempered pam backsplash..



dito sa cavite, hindi pa pala kasama ang graphicote, ang mahal PHP 700 daw pag kasama graphicote



pwedeng pwede yan sa charlotte, ganda nga ng orientation sa inyo, nakahiwalay talaga ang kitchen...pm sent



puno na daw inbox mo

sorry luv 143..yan nag delete na ako ng messages,,,pag my time ka paki pm nlang sakin ulit ha..salamat!

[bryant77]

medyo mahal nga, normally, 230 lang ang addtl cost ng pa graphicote.
kung mag markup sila, siguro abot ng 270. pero parang naging +420. hehehe.

di mo rin need ng 3/8" thick. 1/4" is enough lalo na kung ipapatemper mo.
pag nilagyan ng double adhesive sa likod, parang 3/8" na rin kakainin niyang kapal.
ang nakikita ko lang problem mo:
#1 yung area ilalim ng range hood, mas mataas sa iba. unless di mo na palalagyan?
#2, yung 3 outlets mo, magkalapit yung 2, medyo risky butasan.

ganda siguro yellow o orange diyan. ano plan mong color?

I think P270/sq.ft price of graphicote is shop price, basic color, plain/rectangular size glass. Hindi pa kasama yun installation & delivery cost. Kung may hole yun glass for the outlet additional cost pa rin. Normally pag may holes at malapit sa side nakatempered na dapat yun glass.

[asiastreak]

I think P270/sq.ft price of graphicote is shop price, basic color, plain/rectangular size glass. Hindi pa kasama yun installation & delivery cost. Kung may hole yun glass for the outlet additional cost pa rin. Normally pag may holes at malapit sa side nakatempered na dapat yun glass.

correct.
of course di pa kasama installation dun at delivery.
no one charges delivery on a per sqft. basis naman.
definitely may additional cost yung pabutas.

from what I understand sa post ni luv143, nandun pa lang sila sa canvassing per sqft. di pa nakikita hitsura ng paglalagyan kung may outlet na bubutasan.

[drumrules]

yap, 3/8" thick pero hindi pa daw kasam ang graphicote...pero sabi nga ng mag install, hindi naman na nga *** kailangan tempered pam backsplash..



dito sa cavite, hindi pa pala kasama ang graphicote, ang mahal PHP 700 daw pag kasama graphicote



pwedeng pwede yan sa charlotte, ganda nga ng orientation sa inyo, nakahiwalay talaga ang kitchen...pm sent



puno na daw inbox mo

hi luv..super thank you sa info's...baka yung contractor mo nalang din siguro contakin ko.. kumusta naman sila magtrabaho?and tanong ko lang din kung ilang weeks yung construction ng ktichen mo?.mas makakatipid ba kung ako nalang bibili ng mga wire baskets?and handles? di ko pa nakiktia yung unit .. sa block 10 ako sa sept plang ako makakauwi kasi dyan sa manila..super exited na nga ako..nagsend na kasi yung pro friends na pwede ko na daw iinspect yung bahay..pero since di ako makapgapply ng leave this month pinaubaya ko muna sa brother ko yung pagchecheck kinopya ko na nlng di yung pinost mo about dun sa dpat inspectsyonin tas sinend ko sa knila...pasensya na dmi kong tanong ha..pero salamat ng mdami hope to hear from you soon..thanks ulit

[twinstar633]

My condo was turned over to me. However I do not like the standard kitchen cabinet. It is some kind of laminate with a simple wood finish. I also wish to replace the handles. Is it an option to just re-laminate with a better quality high gloss finish? Will I need to replace the cabinet doors or simply reface/cover with a different laminate?

Any recommended store who can do the above with quality?

Maraming salamat.

[Iam_me_girl]

hi neo, san ka nakabili ng plyboard na may laminate na? okay lang ba yung gawa na plywood with laminate? dapat ba heat press? saan kaya meron na ganung nabibili?

[cyberfunk]

My condo was turned over to me. However I do not like the standard kitchen cabinet. It is some kind of laminate with a simple wood finish. I also wish to replace the handles. Is it an option to just re-laminate with a better quality high gloss finish? Will I need to replace the cabinet doors or simply reface/cover with a different laminate?

Any recommended store who can do the above with quality?

Maraming salamat.

Most pre-fab cabinet doors that came with the unit has a 5/8" thick laminates. Most are likely to be films rather than laminates. You can buy a machine pressed door if you happen to like their set of available choices or if you want to be unique for that real custom kitchen design you can buy the board substrate and pick the laminate from quality brands. The latest series from Formica is worth framing and hanged on a wall.