Kitchen

[sheilababes]

question po....ano po bang brand ng sink ang maganda at matibay at di kamahalan?yung double bowl po kasi ang gusto namin..kaya lang no idea talaga which is good and not...salamat po!

[bryant77]

question po....ano po bang brand ng sink ang maganda at matibay at di kamahalan?yung double bowl po kasi ang gusto namin..kaya lang no idea talaga which is good and not...salamat po!

Kung sink na maganda at matibay medyo pricey talaga. Yun ibang brand na maganda like "foster" umaabot sa 20K yun price complete with fittings. Makikita mo maganda at pulido yun gawa niya.

Pag mura kse nagsu-suffer din yun quality ng kitchen sink makikita mo may wave yun stainless steel, although yun iba hindi maselan pwede na sa kanila. You can try "tekka","crown" or "hafele" brand. Price range 4K-10K.

Sa mga hardware depot meron niyan. Check mo rin kung kasama na yun P-trap and other fittings. Minsan kse akala mo mura yun pala wala kasama fittings sink lang mismo.

Also dapat may idea ka na rin kung ano gagamitin mo faucet kase may butas yun sink, some has 3 hole other has 1 hole only, depende sa faucet mo. Also consider yun drain board ng kitchen sink meron kse left at right hand, depende sa preference mo at layout ng kitchen. HTH

[bryant77]

sir, a few querries lang po:

1. how do you laminate the plyboards? can the ordinary carpenter do it? where can i buy laminate sheets? how can i make sure that anays won't attack my kitchen cabinets made of plywood?

2. a friend informed me of granite countertops on sale at a nearby home expo. can i buy it now and have it holed and worked on later at home? baka december pa ko magpagawa ng kitchen eh.

tnx!

Answer:
1. You need a carpenter na marunong maglaminate. You can buy laminate sheet sa mga home depot, Unica brand around P500+ per sheet, Multiform P750, (if my memory serves me right ), Wilsonart P1K++. Other materials you will be needing are the ff:
1. Laminate cutter
2. Laminate adhesive (Multibond, maganda dumikit)
3. Laminate sheet (your choice of color)
4. Laminate trimmer
5. PVC Edge band 1mmx22mm

I hope wala na ako nakalimutan.

2. Pwede ka na bumuli ng granite countertop pero wag mo muna pabutasan para sa sink. Pag may butas na yun sa sink, during transport maaring mabasag sa part na yun. Bili ka muna ng kitchen sink bago ka magpabutas, baka sala butas mo, sayang naman yun granite. Although pwede naman irepair pero halata pa rin.

[sheilababes]

thanks for the info sir bryant!! i've seen teka and crown, mas mahal ang teka...yung crown ok na sana ang price kaya lang me nakita akong mga alon-alon nga...any idea kung saang store ako mas makakamura?thanks again!!

[bryant77]

question po....ano po bang brand ng sink ang maganda at matibay at di kamahalan?yung double bowl po kasi ang gusto namin..kaya lang no idea talaga which is good and not...salamat po!

Para akin i will go for "tekka" brand. Try mo rin "hafele".

[sheilababes]

i've contacted hafele..ok naman prices nila..though di ko pa nakita yung products personally. ano po bang adv/disadv ng single or double drain? im planning to get a double bowl po... thanks!!

[fossil7]

bryant77,

anong gamit netong mga to?

4. Laminate trimmer
5. PVC Edge band 1mmx22mm

Do I need the same stuffs pag formica ang ilalagay ko? Madali lang ba maglagay ng mga ganito sa flywoods? I want to make the same pulido effects like those in the stores.

[mariela]

hi bryantt77:
where can i buy laminating sheet, trimmer,pvc edge band? sorry ha dme alam eh...

[BeerhandBop]

"

Do I need the same stuffs pag formica ang ilalagay ko? Madali lang ba maglagay ng mga ganito sa flywoods? I want to make the same pulido effects like those in the stores."

not gonna happen. those pulido effects are because they've been machine laminated at the factories.

[joshua3]

Answer:
1. You need a carpenter na marunong maglaminate. You can buy laminate sheet sa mga home depot, Unica brand around P500+ per sheet, Multiform P750, (if my memory serves me right ), Wilsonart P1K++. Other materials you will be needing are the ff:
1. Laminate cutter
2. Laminate adhesive (Multibond, maganda dumikit)
3. Laminate sheet (your choice of color)
4. Laminate trimmer
5. PVC Edge band 1mmx22mm

I hope wala na ako nakalimutan.

2. Pwede ka na bumuli ng granite countertop pero wag mo muna pabutasan para sa sink. Pag may butas na yun sa sink, during transport maaring mabasag sa part na yun. Bili ka muna ng kitchen sink bago ka magpabutas, baka sala butas mo, sayang naman yun granite. Although pwede naman irepair pero halata pa rin.

thanks much bryant77! God bless!

[fossil7]

"

Do I need the same stuffs pag formica ang ilalagay ko? Madali lang ba maglagay ng mga ganito sa flywoods? I want to make the same pulido effects like those in the stores."

not gonna happen. those pulido effects are because they've been machine laminated at the factories.

Thanks Beer!

[aicute12]

Totoo ba to? Ang tatalino ng mga nandito..

[aicute12]

up ko to, gusto ko tong thread na to..

[earathou]

hi bryant77 o sino po ang may alam sa concern ko dito:

sino may alam na gumagawa ng Kitchen Extension - as in from roofing, walling, and flooring?

ito ang details ng Kitchen Extension (STANDARD BARE):
- Conventional type structural framework;
- CHB wall with smooth plaster finish for interior wall & sandblast finish for exterior wall;
- Reinforced concrete slab (rough finish only);
- Soil poisoning treatment (all underneath footings, slan on fill & - -- immediate surrounding area);
- Prepainted rib type long span roofing on steel roof framing with --heat insulation;
- Kitchen counter top (rough finish only) with stainless kitchen sink w/o utility cabinet;
- Kitchen sink faucet including valves & accessories;
- Drainage & waterline system (including downspout, catch basin, kitchen drain);
- Hardiflex board ceiling on metal frame for interior ceiling with flatwall enamel paint finish (w/o cornice; with airvent);
- Wood flush hollow core door complete w/lockset & hinges for service door painted w/flatwall enamel;
- SCW windows with 3/16" clear glass painted w/QDE white;
- Electrical roughing-in & fixtures (including receptacle, switches & convenience outlet);
- Exterior & interior paint finish (pre-mixed paint for exterior/semi-gloss latex for interior)

mahal kasi sa mismong contractor sa isang Real Estate sa Sta Rosa Laguna it cost around Php 13k per sqm.

pag naka DRESSED UP ay it cost more than double Php 30k per sqm
ito ang additional details for DRESSED UP KITCHEN Extension:
- Laminated kitchen counter top with double bowl kitchen sink;
- Complete with kitchen cabinet and overhead cabinet with 16" x 16" floor tiles

[dolftrackz]

Maghanap ka ng isang reputable or magaling talaga na carpenter tas yung may kilala talaga sa loob ng gumagawa ng Modular Type na Kitchen. Ikaw na kamo sa materyales at labor basta gayahin lang niya kamo yung gusto mong style at color. Ganun yung ginawa ko para makatipid ako ng malaki.

[dolftrackz]

Eto naman skeleton ng Closet na tinatawag...ikaw na rin bahala pumili ng Sliding door niya.

[rendaku]

Help pls. I want to put a pre-measured dispenser for coffee, sugar and cream in the office, to replace the messy big jars and scoop in the dining area. The dispenser would be like a miniature--wall-mounted perhaps--rice dispenser, that would dispense pre-measured (teaspoon) amount of cofee, sugar, cream, instant juice powder, etc. Where can I buy one? Thanks!

[dolftrackz]

[jaruk666]

hi dolftrackz

sir me PM po ko sa inyo hehehehe about ur kitchen pics

[dolftrackz]